Talk:O2k-Peltier Temperature Control: Difference between revisions
Line 12: | Line 12: | ||
We did a quick test today and could reach 0°C chamber temperature quite easily at a room temperature of about 14 °C. To keep this temperature stable the cooling power of the Peltier element was already working at 95% of maximum, so some kind of cool room will probable be necessary. | We did a quick test today and could reach 0°C chamber temperature quite easily at a room temperature of about 14 °C. To keep this temperature stable the cooling power of the Peltier element was already working at 95% of maximum, so some kind of cool room will probable be necessary. | ||
'''Update for O2k Series E:''' | |||
Because Series E | Because Series E Oxygraphs have a more efficient temperature management system the experiment described above was repeated with a Series E O2k. In this case it was not necessary to reduce the room temperature: | ||
O2K - 0°C block temp. - stable Peltier power was reached after about 1:05 h from setting block temp. from stable 37°C to 0°C. - stable Peltier power was about -83 %. - room temperature was 21.1°C | O2K - 0°C block temp. - stable Peltier power was reached after about 1:05 h from setting block temp. from stable 37°C to 0°C. - stable Peltier power was about -83 %. - room temperature was 21.1°C |
Revision as of 15:35, 4 February 2013
Very low temperatures
Question: Is it possible to use the oxygraph with a chamber temperature of 0 °C?
Our system is specified down to 4 °C at 25 deg room temperature and and down to 2 °C at "lower ambient temperature", see specifications. Lower ambient temperature does not necessary mean a "cool room". For the 2 deg, an acclimatised room usually will be enough. While we can only guarantee the working of the instrument within these limits, it is possible to go to 0°C and has been done. In general, this may require a "cool room". To this purpose the main unit itself can be exposed to temperatures down to just above 0°C (all the electronic components are rated at least down to 0°C but obviously 0°C room temperature has to be avoided due to condensation concerns). Also of course for very low room temperatures above 0 deg humidity has to be controlled somehow. We did a quick test today and could reach 0°C chamber temperature quite easily at a room temperature of about 14 °C. To keep this temperature stable the cooling power of the Peltier element was already working at 95% of maximum, so some kind of cool room will probable be necessary.
Update for O2k Series E: Because Series E Oxygraphs have a more efficient temperature management system the experiment described above was repeated with a Series E O2k. In this case it was not necessary to reduce the room temperature:
O2K - 0°C block temp. - stable Peltier power was reached after about 1:05 h from setting block temp. from stable 37°C to 0°C. - stable Peltier power was about -83 %. - room temperature was 21.1°C