You do not have permission to edit this page, for the following reasons:
Free text:
{{Technical support}} __TOC__ {{MitoPedia without banner |abbr= |description=[[Image:Pos_holder.JPG|right|180px]]The '''POS-Holder''', made from blue POM, is screwed into the copper block of the [[O2k-Main Unit]], guiding theguiding the [[OroboPOS|POS]] to the 2-mL [[O2k-chamber]], and keeping the SmartPOS/OroboPOS-Connector in a fixed position for sealing the O2k-chamber with the [[POS-Seal Tip]]. In addition, the POS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. Two units of this item are standard components mounted on the [[O2k-Main Unit]]. |info=[https://www.oroboros.at/index.php/product/orobopos-holder/ '''Product details and purchase information'''] }} == Assembly == ::::* Manual: [https://wiki.oroboros.at/images/2/29/MiPNet22.11_O2k-FluoRespirometer-manual.pdf MiPNet22.11_O2k-FluoRespirometer-manual.pdf] Section 5.2. ::::* Video: [https://www.youtube.com/watch?v=1MSsI1ePMu8&feature=youtu.be Chamber service Insert O2k Chamber] == A damaged POS-Holder may cause medium to leak from the O2k-Chamber == :::* The POS-Holder may be damaged: ::::# During chamber assembly, when fixing the chamber in a wrong rotational position with the [[O2k-Chamber Holder]] (from above) before the POS-Holder is fully inserted, and subsequently screwing tightly the POS-Holder (''see center picture below''). ::::# After fully unscrewing the POS-Holder and forcing during reassembly an improperly aligned holder into the thread of the [[O2k-Main Unit]]. ::::* We recommend to check before any reassembly the mechanical integrity of the POS-Holder (''see'' pictures below). [[File:OroboPOS-Holder002.jpg|left|200px]] [[File:OroboPOS-Holder003.jpg|right|200px]] [[File:OroboPOS-Holder004.jpg|centre|200px]] * Left picture: brand new POS-Holder, no damage on the thread, no damage on the edge. * Center picture: used POS-Holder, almost no damage on the thread, the edge is slightly damaged. * Right picture: heavily used POS-Holder, the thread is slightly damaged, serious damage on the edge of the aperture. ::::* Replacement of a damaged POS-Holder is recommended. For ordering spare parts: [https://www.oroboros.at/index.php/o2k-products/spares/ Spare parts & consumables] ''See'' [[Talk:POS-Holder|Discussion page]] == Keywords == {{Template:Keywords: Chamber volume}}
Save page Show preview Show changes Cancel