Difference between revisions of "Amperometric,Amp"
From Bioblast
(Created page with "{{MitoPedia |abbr=F7 |description=After selection of the Amperometric, Amp channel in the '''O2k configuration''', an Amperometric, Amp tab will appear in the '''O2k contr...") |
(added technical support banner) |
||
| Line 1: | Line 1: | ||
{{MitoPedia | {{Technical support}} | ||
{{MitoPedia without banner | |||
|abbr=F7 | |abbr=F7 | ||
|description=After selection of the Amperometric, Amp channel in the '''[[O2k configuration]]''', an Amperometric, Amp tab will appear in the '''O2k control''' [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click '''Send to O2k'''. Switching off the [[Illumination on/off|illumination]] before each fluorometric measurement is routinely required. | |description=After selection of the Amperometric, Amp channel in the '''[[O2k configuration]]''', an Amperometric, Amp tab will appear in the '''O2k control''' [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click '''Send to O2k'''. Switching off the [[Illumination on/off|illumination]] before each fluorometric measurement is routinely required. | ||
Latest revision as of 11:22, 25 March 2022
 |
Amperometric,Amp |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Description
After selection of the Amperometric, Amp channel in the O2k configuration, an Amperometric, Amp tab will appear in the O2k control [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click Send to O2k. Switching off the illumination before each fluorometric measurement is routinely required.
Abbreviation: F7
MitoPedia O2k and high-resolution respirometry:
DatLab
